Grado Labs

Carry Case for Grado Headphone, It is well made and designed to store your Grado headphones safely when not in use, or while travelling. For Grado SR60 Grado SR80 Grado SR125 GradoSR225 GradoSR325i Grado RS2 Grado RS1

Replace your worn out or broken Grado Prestige series stylus with this factory replacement. Interested in an upgrade, but don't want a new cartridge? All Prestige series styli are compatible; any of these styli will work in any Prestige bo...

The GS1000E retains a sound that is pure Grado rich fullbodied vocals excellent dynamics and an ultra smooth top end The presentation is very detailed the bass is deep and the music is very tight and nonfatiguing All with a soundstage that is huge al...

Replace your worn out or broken Grado Prestige series stylus with this factory replacement. Interested in an upgrade, but don't want a new cartridge? All Prestige series styli are compatible; any of these styli will work in any Prestige bo...

Grado Mini Adaptor 6.3mm to 3,5mm
Mini adaptor cable that converts a 1/4 inch (6.3mm) plug to 1/8 inch (3.5mm) plug. The mini adaptor cable has a 1/8 inch (3.5mm) plug then 8 inches (20cm) of cable connected to a 1/4 inch (6.3mm) jack. The 8 inches (20cm

The simplest way to experience Grado sound, the SR60x produces an impressive soundstage in an affordable headphone.

The New Classic
The first Grado headphone, this is the legendary pair that started it all.
Transducer Type: Dynamic
Operating Principle: Open Air
Frequency Response: 20 - 20,000 hz
SPL 1mW: 99.8 dB
Nominal Impedance: 38 ohms
Driver Matched dB: .1 d

The newly redesigned Blue3 and Red3 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Blue3 and Red3 models use a four piece OTL cantilever technology, standard oxygen free ...

These are the ear cushions used on the Grado headphones SR225, SR325, RS1 and RS2. They also fit on the SR60, SR80 and SR125 headphone. Please consider them, they will bring more detail in sound and more comfort to your ears.

These are the Ear Cushions used on the Grado SR60, 80 and 125.
If you need new cushions, please consider replacing them by the luxury ones used on the more expensive Grado headphones. It will bring more detail in sound and more comfort on your ears ...

Featuring a new species of handcrafted Mahogany earpieces made using an intricate curing process; Grado has been able to optimize the tonal quality. The RSX uses new upgraded dynamic transducers and the new 8 conductor cable design all in an open-ai...

Grado STYLUS REFERENCE SIGNATURE-3

The GW100 are the worlds first open-back Bluetooth headphones. Their speaker housings and internals have been designed from the ground up, now working in tandem to notably diminish escaping sound by up to 60%.*

There is a design language that’s seen th

Four conductor: 15 foot (450cm) extension cable terminated with a 3.5mm plug and a 3.5mm jack.
The cables are constructed from the same high quality super annealed copper wire as the X-Series headphone cables, with braided sheathing. For longer lengths c

Stereo Headphone Adapter
Goldplated Stereo mini-jack to Jack

The newly redesigned Silver3 and Gold3 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver3 and Gold3 models use a four piece OTL cantilever technology, ultra-high puri...

The newly redesigned Silver3 and Gold3 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Silver3 and Gold3 models use a four piece OTL cantilever technology, ultra-high puri...

The newly redesigned Blue1 and Red1 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Blue1 and Red1 models use a four piece OTL cantilever technology, standard oxygen free ...

The newly redesigned Black3 and Green3 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black3 and Green3 models use a three piece OTL cantilever technology, standard oxyge...

These are the ear cushions used on the Grado headphones GS1000 and PS1000. They also fit on the SR60 to SR325 and RS1, RS2 headphones.

Grado Labs offers a 15 foot 450cm extension cable terminated with a 1/4 inch 6.35mm plug and a 1/4 inch 6.35mm jack. This cable is constructed from the same high quality wire as their headphone cable. For longer lengths the cable may be piggybacked up to

The new Grado SR325X has an upgraded driver and cable design. The way the SR325X driver, cable and metal housing move air and react to sound vibrations are now less affected by transient distortions. With the new 8 conductor cable design you will notice

Features are the same as the SR125X, new driver, cable and housing designs, but this headphone has an increased rear air flow, utilizes Grado's larger ear cushion and has closer matched drivers. Air flow is increased by 50% which is achieved through...

The newly redesigned Black3 and Green3 have had their coil design reconfigured, and the effective moving mass of their generating system has been reduced by 17%. The Black3 and Green3 models use a three piece OTL cantilever technology, standard oxyge...